Raypak Digital 399,000 BTU Electronic Natural Gas Swimming Pool Heater with Riser | Pool Supplies Canada (2024)

FAQs

Is a higher BTU pool heater better? ›

The larger the heater (higher BTU), the more quickly it will heat your water. This means it is more efficient. You have to run it less so it saves you money. You won't have to wait as long for the water to be enjoyed.

A 100,000 BTU heater uses 1 therm of natural gas per hour, so a 400,000 heater consumes 4 therms an hour. 4 therms an hour x $1.67 = $6.68 per hour. So the magic number based on the most common 400,000 BTU pool/ spa heater is $6.68 per hour in gas cost to run your heater.

Pools up to 30,000 gallons should look at the AquaCal 120K BTU or higher, and 40,000 gallon inground pools should look at models like the Pentair 140K BTU.

A propane or natural gas pool heater typically lasts between 7 to 12 years. But electric heaters last between 15-20 years, and solar heaters have a lifespan of about 20-30 years.

Also, turn the temperature down or turn off the heater whenever the pool won't be used for several days. This will save energy and money. It's a myth that it takes more energy to heat a pool back up to a desired temperature than you save by lowering the temperature or turning off the heater.

Natural gas is arguably the best choice for most people when choosing a good pool heater. However, that's not because gas-powered pool heaters are more reliable or cheaper to run or last longer than electric ones.

So, how much electricity does a pool heat pump use? About 5 kilowatts per hour per 100,000 BTU heat pump. For a general 100,000 BTU pool heat pump, the power you`ll utilize is approximately 5,000 Watts per hour. Typically, the National average for power stands at 13 cents for every kilowatt-hour.

While you can complete most of the installation on your own, you won't be able to do all of it. Pool heaters are hardwired into your home's electrical box and typically require a dedicated circuit because they use so much juice. This is not a job you can handle yourself.

If you choose a heater that's too small, you'll likely find that it simply can't keep up, leaving you with less-than-ideal water temperatures. On the other hand, bigger isn't always better. A pool heater that is too large for your needs will burn unnecessary energy, which can get expensive.

EXAMPLE: To raise the temperature to a 40,000 gallon pool 2o per hour, the heater should be approximately twice the capacity of a Model DR or F650-WP - selecting a Model CLM150-WP (1,500,000 BTU).

How many BTU heater do I need for a 16x32 pool? ›

You need to make sure that the pH and alkalinity level of the pool water is at the level it needs to be to be sure the water is not too acidic or basic. Failure to do so can be detrimental to not only the pool but (HINT,HINT) the POOL HEATER, specifically the heat exchanger.

They have small space requirements in general but gas heaters must have clearance at least 4 feet horizontally away from windows and doors and vents into buildings as a precaution against carbon monoxide entering a home or facility.

We do not recommend leaving a pool heater on overnight for most property owners, even ones with advanced solar heating systems. The massive power draw will negate any savings they gain from using solar cells and receiving renewable credits from the government.

The higher the BTU, the more quickly you will be able to heat your water. This measurement applies to both natural gas and electric heat pumps. Pro Tip: Always go with the largest size (BTU) of heater your pool can accommodate. This leads to quicker water heating and lower operating costs.

To maintain the temperature, you need about 10 BTUs per hour, per square foot of surface, per degree above the air temperature. That means keeping a pool with a surface area of 300 square feet at 80 F (27 C) degrees in 60 F (15 C) degree weather would require 60,000 BTU per hour.

The BTU rating of a water heater indicates its heating capacity. Higher BTU ratings mean that the water heater can heat water more quickly and efficiently. It is essential to choose a water heater with an appropriate BTU rating to meet your household's hot water demands.

If you live in a very hot or very cold region, you may want a system with a higher BTU rating to quickly respond to changes in the weather. In areas where the weather is more temperate, you can go with a smaller more energy-efficient unit.